Free tool, no signup

KDP Cover Calculator: Spine Width and Full Cover Size

Choose your trim size, paper and page count. You get the spine width, the full paperback cover size with bleed in inches, millimetres and pixels, whether KDP allows spine text, and a template with the safe zones marked.

KDP accepts 24 to 828 pages for this size and paper.

Spine width

0.450 in

11.4 mm

Full cover with bleed (width × height)

12.700 × 9.250 in

322.6 × 234.9 mm · 3,811 × 2,775 px at 300 DPI

Spine text is allowed: KDP needs at least 79 pages. Leave at least 0.0625 in (1.6 mm) on each side of the text.
BackFrontBarcodeSpine
  • Bleed 0.125 in
  • Trim
  • Spine folds
  • Keep text inside
  • Barcode area
Back and front panels6 × 9 in each
Spine200 pages × 0.002252 in = 0.4504 in
Width0.125 + 6 + 0.4504 + 6 + 0.125 = 12.7004 in
Height0.125 + 9 + 0.125 = 9.2500 in
Text safe zone0.125 in (3.2 mm) inside the trim and the spine folds
BarcodeKDP adds a 2 × 1.2 in box in the lower right of the back cover. Keep that corner clear.

The template is a transparent guide layer at the exact cover size. Place it on top of your design while you lay it out, then hide or delete it before you export: KDP prints anything left on the file.

Figures from KDP's paperback cover and trim size help pages, checked November 16, 2026. KDP's previewer has the final say, so always check your cover there before you publish.

How to make your cover the right size

  1. 1

    Choose the trim size, the ink and paper and the page count exactly as you will set them in KDP. The page count is the one KDP shows after you upload the interior, blank pages included.

  2. 2

    Make your design canvas the full cover size shown, at 300 DPI. Download the template (PNG or PDF) and place it on top of your design in Canva, Photoshop, Affinity or GIMP.

  3. 3

    Keep the title, author name and any text inside the green safe lines, extend the background art into the red bleed and leave the barcode corner clear.

  4. 4

    Hide or delete the template layer, then export one PDF at 300 DPI with the back, spine and front on a single page.

  5. 5

    Upload it in KDP and check the cover in the previewer. If you change the page count or the paper later, recalculate: the spine width changes with them.

KDP cover questions

How do you calculate the spine width for a KDP paperback?

Multiply the page count by the paper thickness KDP publishes: 0.002252 in per page for black & white ink, white paper; 0.0025 in per page for black & white ink, cream paper; 0.002252 in per page for standard color ink, white paper; 0.002347 in per page for premium color ink, white paper. A 200-page book in black and white on white paper has a 0.450 in spine.

What is the full cover size formula?

Width is bleed + back cover + spine + front cover + bleed, where both covers are the trim width and the bleed is 0.125 in. Height is the trim height plus 0.125 in of bleed at the top and at the bottom. A 6 x 9 in book with 200 black and white pages on white paper comes to 12.700 x 9.250 in.

How many pages do I need for text on the spine?

KDP allows spine text from 79 pages. Below that the spine is too thin to keep text on it reliably, so use a color or art only. When you do add text, leave at least 0.0625 in (1.6 mm) on each side.

What resolution should a KDP cover be?

At least 300 DPI. The calculator shows the cover size in pixels at 300 DPI, which is the minimum canvas size to design at.

Where does the barcode go?

KDP adds the ISBN barcode in a 2 x 1.2 in white box in the lower right corner of the back cover. KDP does not publish an exact position, so the template marks an approximate keep-clear box with a margin. Keep text and important art out of that corner.

Does it work for hardcover books?

No. KDP does not publish a formula for hardcover spines, only its own cover calculator, so use the template generator on KDP for case laminate hardcovers. This calculator follows the published paperback figures.

Is the template free to use?

Yes, with no account and no watermark. It is a transparent layer with guide lines only: place it on top of your design while you work, then hide it before you export your final cover.

Skip the sums: get the cover made for you

BookBlitzAI writes the book, designs the cover and builds the full KDP paperback files, with the spine sized to your exact page count. See the paperback formatter, the free description generator or pricing.

No card required.